♦ Used for bonding cylindrical fitting parts in clearance fit, interference fit and transition fit.

♦ Well prevents loosening and leakage from impact and vibration.

♦ Provides shear strength of 24MPa within 24 hours.

♦ Heat tolerance up to 170℃。

♦ Perfect designed for various metal parts.

♦ General-purpose and high strength bonding adhesive with good tolerance of minor surface contamination.

♦ Well bonding cylindrical fitting parts, preventing loosening and any leakage from impact and vibration.

♦ Max radial clearance for filling is 0.13mm.

♦ Initial curing will be achieved within 20 min. It can well prevents damage led by vibration and corrosion between metal parts.

♦ Used for bonding cylindrical fitting parts in clearance fit, interference fit and transition fit.

♦ Well prevents loosening and leakage from impact and vibration.

♦ Enhance press fits between parts.

♦ Repair damaged rotor to shaft fits or parts with improper shrinkage allowance.

♦ Ideal radial clearance for filling is under 0.13mm.

♦ Provides shear strength of 24MPa within 24 hours.

♦ Heat tolerance up to 149℃。

♦ Perfect designed for various metal parts.

♦ High viscosity. High strength, no fluidity.

♦ Used for bonding valve casing, sleeve,cylinder liner and keyways, Injection molding core sleeve etc.

♦ Temperature tolerance is up to 232℃。

♦ Provides more than 19.0N/mm²shear strength to steel material.

♦ Well prevents loosening and leakage from impact and vibration.

♦ well prevents damage led by vibration and corrosion between metal parts.

♦ Excellent designed for bonding cylindrical fitting parts, especially where bond gaps reach 0.25 mm and where maximum strength at room temperature is required.

♦ Curing within 5 min.

♦ Fast curing, high strength, high viscosity.

♦ Well performed on restoring correct fits on worn shafts, spun bearings, and damaged keyways.

♦ Max gap of filling is 0.5mm.

♦ Used for bonding cylindrical fitting parts, especially where disassembly is required regularly for service operation.

♦ Max filling clearance is under 0.25mm.

♦ Initial curing will be achieved within 10-30 min.

♦ Offers high temperature performance which can stand continuous working temperature at 175℃。

♦ Filling clearance is 0.15mm. Curing within 5 min.

♦ Pressure fits healant.

♦ Repair damaged machine parts.

♦ Restore correct match between parts. Max filling gap is 0.5mm.

♦ Used for bonding cylindrical fitting parts in clearance fit and transition fit.

♦ Repair damaged rotor to shaft fits or parts with improper shrinkage allowance.

♦ Initial curing can be achieved within 10 min.

♦ Provides more than 20.7N/mm²shear strength to steel material.

♦ Max filling clearance is under 0.25mm.